ปั๊มจุ่ม HCP AS Series

ปั๊มจุ่ม ปั๊มแช่ หรือปั๊มสูบน้ำเสีย HCP AS Series Used as general dewatering pumps in mines, quarries and construction sites. These radically engineered, robust pumps offer unmatched wear resistance and performance.The pump of choice if you demand reliability.

4.5/5

ปั๊มจุ่ม ปั๊มแช่ หรือปั๊มสูบน้ำเสีย HCP รุ่น AS Series

FEATURE

  • Pumps range from 1.1kW to 7.5kW (400 and 550Volt.) The 1,1kW pumps are also available in single phase 240 Volt
  • Double permanently lubricated mechanical seal (Carbon/Ceramic, Silicone Carbide/Silicone Carbide) The seal is located in the oil housing and runs independently from the pumped product.
  • Nitrile rubber “O”- rings and gaskets.
  • The top discharge design forces water past the motor during operation resulting in effective cooling.
  • All HCP pumps are fitted with a motor protector “auto cut” thermal device. The auto-cut protector is a mechanical thermal switch that cuts power to the electric motor in the event of a power surge, lock rotor, phase failure and overloading. The switch automatically restarts the motor once the temperature inside the motor drops to 60-70°C
  • (*) Available with a single float level switch for automatic operation.
  • Maximum submersion depth 30m.
  • The combination of stainless steel and cast iron makes these pumps more durable than traditional aluminum pumps
  • The Hi-Chrome alloy impeller and suction cover has excellent wear properties

 

SPECIFICATION SUBMERSIBLE PUMP HCP AS SERIES
Model Motor Bore Pole Head Capacity Solid Passage
(HP) (Inch) (M) (m3/min) (mm)
 AS-215 1.5 2 2 13.5 0.2 8
 AS-32A 2 3 2 10 0.4 11
 AS33A 3 3 2 14 0.4 11

ติดต่อสอบถามใบเสนอราคา

สินค้าที่เกี่ยวข้อง

Pagespeed Optimization by Lighthouse.